folgenden Artikel habe ich mal im Netz gefunden; das war ein Copen in Australien und ich weiß nicht, ob das bei unseren auch funktioniert:
Zitat:
Ok, this is a very easy way of getting a tiny bit more power. ill explain what it is and how to do it.
ok the standard boost controller on the copen control how much boost is being used at what RPM (revs per min).
up untill 4500rpm your beast is running 10PSI
then the standard boost controller will cut in and boost will drop to 5PSI after anything above 4500rpm.
Well there is a way to make her run 10psi all the way to the rev limiter at NO COST, and is easy!
ok I have no photo YET! but it will get posted on the photo BBS as soon as I have it. follow my instructions tho and u can do it without a photo pretty easy.
1. Open Bonnet
2. Get a 10mm spanner and remove the block plastic daihatsu cover from top of engine by removing the two bolts.
3. underneath there is the engine, On top of the engine in the Top Left hand corner is the Stock standard boost controller, Locate that, there should be 2 vacume hoses coming out of it, one of which goes to the turbo (use this as a basis for identifying it)
4. Remove the Power Plug from the standard boost controller.
5. Place the cover back on engine and fit bolts
6. Drive around at 10psi full rev range
|
glaube btw nicht, dass das eine intelligente Methode ist
